|
TriScanner
Zircon
Shipping: Currently, item can be shipped only within the U.S.
Shipping weight: 0.65 pounds.
ASIN: B00002254B
|
Introduction
Finds Studs, Joists, Pipes, Conduit... Even Rebar!
TriScanner Pro uses advanced scanning technology to find metal (rebar, copper pipes), studs and joists behind walls, floors and ceilings.
Scans through drywall, plywood and most flooring, up to 1-1/2" (3.8 cm) thick to find wood and metal studs and joists while continuously detecting "hot" electrical wires (unshielded) for safety. Finds metal through surfaces up to 1-1/2" (3.8 cm) thick, or rebar in concrete to a depth of 3" (7.6 cm). LED display and audio signal indicate when target has been located.
Exclusive, patented features ensure instant calibration, reliability and performance.
What It Does
Common applications for the TriScanner:
- Demolition aid
- Inspections for wall
- Find treasure in wall
- Install trim
- Tightening floor joists
- Installing wiring box
- Installing ceiling fan
- Installing grab bars
- Security searches
- Medical metal detection
- Scan used lumber for nails
- Scan trees before milling
- Find hot wires
- Check circuit breaker
- Differentiate between wood and metal studs
Find wood studs/joists to hang:
- Shelves
- Hooks
- Pictures
- Drapery rods
- Mirrors
- Heavy objects
Find:
- Metal studs
- Conduit
- Copper piping
- Electrical lines
- Rebar
- Horizontal inner wall support
- Metal electrical boxes
- Inner wall exhuast vents
- Inner wall ducting
- Hot outlets
- Metal radiant heating pipes and cables
- Metal plumbing pipes in concrete
- Metal on archaeological digs
- Lost jewelry in grass, beach, home
- Survey markers
Main Features
TriScanner Pro uses advanced scanning technology to find metal (rebar, copper pipes), studs and joists behind walls, floors and ceilings.
- DeepScan* technology finds wood studs & joists up to 1-1/2 inches (3.8 cm) deep in walls.
- Finds metal pipes up to 1-1/2 inches (3.8 cm) deep in walls.
- Finds rebar up to 3 inches (7.6 cm) deep in concrete.
- AC feature continuously detects "hot" electrical wires (unshielded).
- Patented TruCal automatic calibration ensures accuracy.
- Patented over-the-stud indication.
- LED display and audio signal indicate target.
- no guesswork.
- Ergonomic design and comfortable grip.
Product Specifications
Dimensions:
- .20" H x 3.00" W x 6.00" L
- 3.0 cm H x 7.6 cm W x 15.2 cm L
Weight: 6.5 oz. (184 g) without battery
Battery Type: 9-Volt alkaline (not included)
Accuracy:
In Stud Scan mode
Uusing the dual scan and mark procedure, the user can determine the center of a wood or metal stud through drywall up to 3/4" (1.9 cm) thick with a typical accuracy of 1/8" (3 mm).
In DeepScan* mode
Uusing the dual scan and mark procedure, the user can determine the center of a wood or metal stud through drywall up to 1-1/2" (3.8 cm) thick with a typical accuracy of 3/16" (5 mm).
In Metal Scan mode
Using the dual scan and mark procedure, the user can determine the center of 1/2" (1.3 cm) copper pipe through drywall up to 1-1/2" (3.8 cm) deep with a typical accuracy of 1/8" (3 mm). Using the same procedure, the user can determine the center of 1/2" (1.3 mm) rebar up to 3" (7.6 cm) deep in concrete with a typical accuracy of 1/2" (1.3 cm)
Audio: Loudness - 65 dB at 18" (46 cm)
AC Detection: 90 - 250 Volts at 50 - 60 Hertz laterally within 12" (30cm) of a "hot" wire (unshielded) to a typical depth of 2"(5cm).
Operating Temperature: 20° F to 120° F (-7° C to 49° C)
Storage Temperature: -20° F to 150° F (-29° C to 66° C)
Humidity: 80% RH (non-condensing)
Shock Resistance: Shock resistant from a maximum six-foot (1.8 m) drop onto concrete
Water Resistance: Water and splash resistant, not waterproof
|
