Multiscanner Pro Zircon Shipping: Currently, item can be shipped only within the U.S. Shipping weight: 0.7 pounds. ASIN: B00004TRBC Check price & buy it

Introduction

MultiScanner Pro uses advanced scanning technology to detect studs, metal and "hot" unshielded AC wiring behind walls, floors and ceilings.

A unique slide switch allows users to select the desired mode, including turning off stud and metal scan to look only for hot AC wires. To aid in marking stud edges, the one-of-a-kind SpotLite pointing system projects a beam of light on the wall when MultiScanner Pro has located the edge of a stud.

Just some of MultiScanner Pro's many uses include the ability to fasten hardware in the best location, avoid drilling or nailing into hot electric wires and locate pipes to avoid sawing into them. MultiScanner Pro also finds rebar in concrete to save the trouble and expense of broken drill bits and saw blades. [What can Multiscanner do?] [StudVision LCD]

What It Does

Common applications for the MultiScanner:

Find wood studs/joists to hang:

• Shelves
• Hooks
• Pictures
• Drapery rods
• Mirrors
• Heavy objects

Common Use:

• Demolition aid
• Inspections for wall
• Find treasure in wall
• Install trim
• Trace wires
• Tightening floor joists
• Installing wiring box
• Installing ceiling fan
• Installing grab bars

Find:

• Metal studs
• Conduit
• Copper piping
• Electrical lines
• Rebar
• Horizontal inner wall support
• Metal electrical boxes
• Inner wall exhuast vents
• Inner wall ducting
• Hot outlets
• Metal radiant heating pipes and cables
• Metal plumbing pipes in concrete
• Metal on archaeological digs
• Lost jewelry in grass, beach, home
• Survey markers
• Security searches
• Medical metal detection
• Scan used lumber for nails
• Scan trees before milling
• Find hot wires
• Check circuit breaker

Main Features

The Multiscanner Pro come with the following features:

• Advanced scanning technology detects studs, metal and "hot" unshielded AC wiring behind walls, floors and ceilings.
• SpotLite pointing system automatically displays a beam of light over the edge of a stud.
• Metal Scan finds rebar in concrete up to 3" (7.6 cm) deep and copper pipe or conduit up to 1-1/2" (3.8 cm) deep behind walls, ceilings and floors
• Continuous AC detection in all modes for safety
• Easy-to-use LCD display and audio signal indicate target
• Four switch-selectable modes
• DeepScan* mode for extra thick surfaces scans through up to 1-1/2" (3.8 cm) of drywall, plywood, and most flooring to find wood or metal studs and joists
• Patented TruCal instant calibration and over-the-stud indication ensure accuracy
• High-impact case with comfortable grip

Product Specification

• Dimensions: 1.2 in. H x 3.0 in. W x 6.0 in. L (3.0 cm H x 7.6 cm W x 15.2 cm L)
• Weight: 6.4 oz. (181 g) without battery
• Battery Type: 9-Volt alkaline (not included)
• Battery Life: Two years at 10 minutes per day with alkaline battery
• Accuracy:
• In Stud Scan mode
  Using the dual scan and mark procedure, the user can determine the center of a wood or metal stud through drywall up to 3/4" (2 cm) deep with a typical accuracy of 1/8" (3 mm).
• In DeepScan® mode
  Using the dual scan and mark procedure, the user can determine the center of a wood or metal stud through drywall up to 1-1/2" (3.8 cm) deep with a typical accuracy of 3/16" (5 mm).
• In Metal Scan mode
  Using the dual scan and mark procedure, the user can determine the center of 1/2" (1.3 cm) copper pipe through drywall up to 1-1/2" (3.8 cm) deep with a typical accuracy of 1/8" (3 mm). Using the same procedure, the user can determine the center of 1/2" (1.3 mm) rebar up to 3" (7.6 cm) deep in concrete with a typical accuracy of 1/2" (1.3 cm).
• In AC Scan mode
  The location of 90-250 Volts at 50-60 Hertz (unshielded) can typically be found within 6" (15.2 cm) laterally on a wall to a typical depth of 2" (5 cm)
• Operating Temperature: 20° F to 120° F (-7° C to 49° C)
• Storage Temperature: -20° F to 150° F (-29° C to 66° C)
• Humidity: 80% RH (non-condensing)
• Audio: Loudness - 65 dB at 18" (46 cm)
• Shock Resistance: Shock resistant from a maximum six-foot (1.8 m) drop onto concrete
• Water Resistance: Water and splash resistant, not waterproof